002 trans has 8mm holes

930 CV's have
3/8 -24 fine thread bolts

Procedure:

• remove cup seal

• remove c-clip

• insert 930 to 002
  drive flange

• replace c-clip

• tap drive flange and
  C-clip against the wavy
  washer inside trans
  with large socket
  to seat C-clip

• Replace cup seal

• insert 930 CV to test fit

• Find a 930 AXLE
  that fits the trailing arms system and install
  our 3x3 needs about 19.25"

• connect to 930 stubs

• Torque the bolts to spec

• READY TO RIP!